Samsung Dryer HC Error Code
What the HC code means
Heating error: the dryer is getting too hot. Samsung says the most common cause is a clogged lint screen or vent system trapping heat.
Likely causes
- Clogged lint screen trapping heat
- Restricted exhaust vent system
- Low voltage supply on electric models
- Faulty heating element, thermostat or thermistor
How to fix it — step by step
- Clean the lint screen thoroughly
- Clear lint from the vent hose, wall duct and outside vent hood
- Check the breaker panel - on electric dryers one half of the double breaker can trip; switch it fully off then on
- Unplug for 2-3 minutes, restore power and restart; if the code returns with a clean vent, request service
Parts that commonly fix the HC code
- heating element - Shop at RepairClinic
- thermostat - Shop at RepairClinic
- thermal fuse - Shop at RepairClinic
- thermistor (temperature sensor) - Shop at RepairClinic
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.