Samsung Dishwasher WaterWall models 7E Error Code
What the 7E code means
WaterWall reflector error: the WaterWall reflector bar is not able to move correctly, so there is little or no spray action from it.
Likely causes
- Reflector blocked by a fallen item or loading
- Packing tape or material left on the reflector
- Reflector out of position
- Reflector motor failure
How to fix it — step by step
- Open the dishwasher and check nothing has fallen to block the reflector bar at the back of the tub
- Remove any packing tape and reseat the reflector correctly
- Make sure tall items are not obstructing its travel
- Run a cycle; if the code returns, request service
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the likely broken part is the waterwall reflector.
Parts that commonly fix the 7E code
- waterwall reflector - Shop at RepairClinic or Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Working on a specific model? The official Samsung manual is on Samsung's support site — you'll need your model number.
Find your model number on the tub edge inside the door. It's the key to the right manual pages and the right parts.