Roborock Robot vacuum S7 MaxV Ultra, S7 Max Ultra, S8 Pro Ultra Error 42
What this problem usually means
Dock maintenance brush error (maintenance brush jammed) on models with a mop-washing Empty Wash Fill Dock. Roborock's support article scopes Error 42 to exactly three models - the S7 MaxV Ultra, S7 Max Ultra and S8 Pro Ultra: if the maintenance brush stops at the left side of the cleaning sink it may be jammed; if it stops at the right side the water filter may be blocked or not fitted in place. Newer models otherwise report dock faults as unnumbered app notifications - Error 42 is the exception that keeps a number.
Likely causes
- Maintenance brush jammed on something in the cleaning sink / tray
- Dock water filter blocked
- Dock water filter not fitted in place
How to fix it — step by step
- Stop the dock cycle and open the cleaning tray / sink area
- Remove anything jamming the maintenance brush
- Remove, clean and refit the water filter in place → Shop the filter at Amazon
- Restart the dock cleaning cycle
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the likely broken part is the filter.
Parts that commonly fix it
- filter - Shop at Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Working on a specific model? The official Roborock manual is on Roborock's support site — you'll need your model number.
Find your model number on the underside label or in the app. It's the key to the right manual pages and the right parts.
Related Roborock Robot vacuum S7 MaxV Ultra, S7 Max Ultra, S8 Pro Ultra problems
See all Roborock S7 MaxV Ultra, S7 Max Ultra, S8 Pro Ultra codes & guides →