Roborock Robot vacuum S4 Max, S5 Max, S6 Pure, Q5, Q7 Max Error 26

What this problem usually means

Wall sensor dirty. Wipe / clean the wall sensor. Error 26 is the wall-sensor number in the S4 Max, S5 Max and S6 Pure manuals and across the Q series (Q5, Q5+, Q5 Pro and Q7 Max manuals all list Error 26). It is the same fault as Error 15, which is the number used by the S4, S6, S6 MaxV and the whole S7 series - check which number your own manual lists. The side wall sensor cannot read the wall correctly when dirty.

Likely causes

  1. Dust or dirt on the wall sensor window
  2. Sensor window smeared with grime

How to fix it — step by step

  1. Find the wall sensor on the side of the robot
  2. Wipe the sensor window clean with a soft, dry cloth
  3. Move the robot to a new location
  4. Restart cleaning

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix it

This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Working on a specific model? The official Roborock manual is on Roborock's support site — you'll need your model number.

Find your model number on the underside label or in the app. It's the key to the right manual pages and the right parts.

Related Roborock Robot vacuum S4 Max, S5 Max, S6 Pure, Q5, Q7 Max problems

See all Roborock S4 Max, S5 Max, S6 Pure, Q5, Q7 Max codes & guides →