Roborock Robot vacuum E Series, S4, S4 Max, S5 Max, S6, S6 Pure Error 10
What this problem usually means
Filter blocked or not completely dry. Numbered as Error 10 only on E-series models (E3/E4/E5 manuals: 'check that the filter is dry or clean the filter', dry at least 24 hours) and S-series models of the S4/S5/S6 generation (for example S4, S4 Max, S5 Max and S6 Pure manuals). The Q-series and S7-series manuals list the same fault without a number, as 'Filter blocked or wet', so a Q or S7 robot will not announce 'Error 10'. A wet or clogged filter restricts airflow.
Likely causes
- Filter still wet after washing
- Filter clogged with dust and fine debris
- Filter worn out and no longer clearing with cleaning
How to fix it — step by step
- Remove the filter and tap it clean against a bin → Shop the filter at Amazon
- If it was washed, leave it to dry completely for at least 24 hours before refitting
- Refit the dry filter and dustbin correctly
- Restart cleaning, and replace the filter if the error keeps returning
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the likely broken part is the filter.
Parts that commonly fix it
- filter - Shop at Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Working on a specific model? The official Roborock manual is on Roborock's support site — you'll need your model number.
Find your model number on the underside label or in the app. It's the key to the right manual pages and the right parts.
Related Roborock Robot vacuum E Series, S4, S4 Max, S5 Max, S6, S6 Pure problems
See all Roborock E Series, S4, S4 Max, S5 Max, S6, S6 Pure codes & guides →