Roborock Robot vacuum E Series, S4, S4 Max, S5 Max, S6, S6 Pure, S6 MaxV Error 11
What this problem usually means
Strong / high-intensity magnetic field detected. The robot is too close to a magnetic virtual wall / barrier tape when starting, so it will not start there. Numbered in the E-series manuals (E3) and the S4/S5/S6-generation S-series manuals (for example S4, S4 Max, S5 Max, S6 Pure, S6 MaxV). The Q-series and S7-series manuals do not list Error 11 at all.
Likely causes
- Robot starting right next to magnetic virtual-wall tape
- Strong magnetic source close to the starting position
How to fix it — step by step
- Move the robot well away from the virtual wall / magnetic tape
- Place it in an open area away from the boundary strip
- Restart cleaning from the new location
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the fault is internal - there is no documented owner fix beyond the steps above. If you're not comfortable opening the machine up, a repair shop is the next step.
Parts that commonly fix it
This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Working on a specific model? The official Roborock manual is on Roborock's support site — you'll need your model number.
Find your model number on the underside label or in the app. It's the key to the right manual pages and the right parts.
Related Roborock Robot vacuum E Series, S4, S4 Max, S5 Max, S6, S6 Pure, S6 MaxV problems
See all Roborock E Series, S4, S4 Max, S5 Max, S6, S6 Pure, S6 MaxV codes & guides →