RAM Truck 2500 (DJ, 2013–2018) DEF system problems
What this problem usually means
On 2013-2018 Ram 2500s with the 6.7L Cummins, DEF warnings, reduced power and countdown-style derates are common repairs, especially in cold weather. Know Your Truck lists DEF heater failures, NOx sensors and DEF quality sensors as the pattern; a failed heater in the DEF tank is often replaced as part of the tank assembly, and bad DEF or wiring can set the same warnings.
Likely causes
- Failed DEF tank heater, especially in freezing weather
- Failing NOx sensor giving false emissions readings
- Contaminated, old or crystallized DEF upsetting quality sensors
- Wiring damage to the DEF tank or dosing components
How to fix it — step by step
- Note the exact warning and any countdown to reduced speed, and have the codes read before the derate limits the truck
- Check the DEF level and fill only with fresh, sealed DEF; note the date on the container
- Ask whether the heater, NOx sensor and wiring were tested individually, since they set similar warnings → Shop the nox sensor at Amazon
- Keep the DEF cap closed and the filler clean to keep crystals and dirt out of the system
- Do not ignore a DEF warning to the end of the countdown; the truck can limit itself to a crawl until it is repaired
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the likely broken part is the def heater.
Also tied to this fault: def tank assembly - Shop at Amazon; nox sensor - Shop at Amazon
Parts that commonly fix it
- def heater - Shop at Amazon
- def tank assembly - Shop at Amazon
- nox sensor - Shop at Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.