Porsche SUV Cayenne (957, 2008–2010) Coolant Leak From Glued Pipe Joints

What this problem usually means

The 957 Cayenne's 4.8 V8 (2008-2010, S, GTS and Turbo) moved away from the old valley pipes, but some coolant joints are still glued: the upper front pipe can slip out of its housing and the rear crossover pipe between the heads can let go suddenly. Porsche's updated front housing uses bolted pipes; the rear fix often needs the engine removed, so a sudden large coolant loss on these cars is a stop-now event.

Likely causes

  1. Glued upper front coolant pipe slipping out of its housing → Shop the coolant pipe housing at Amazon
  2. Rear crossover pipe bond failing between the cylinder heads
  3. Heat cycling and vibration degrading the adhesive bonds
  4. Ageing hoses and seals adding smaller leaks

How to fix it — step by step

  1. Ask whether the upper front housing has been updated to the bolted-pipe version
  2. Look for coolant at the front and especially the back of the engine → Shop the coolant at Amazon
  3. Treat sudden coolant loss or a temperature warning as stop-driving; a glued joint does not reseal
  4. Have the system pressure-tested to find which joint is letting go
  5. Budget labour realistically - the rear crossover repair may involve engine removal

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix it

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.

Related Porsche SUV Cayenne (957, 2008–2010) problems

See all Porsche Cayenne (957, 2008–2010) codes & guides →