Porsche Sedan Taycan (J1, 2020–2024) Loss of drive power while driving
What this problem usually means
Monitoring software in early 2020-2021 Taycans could wrongly detect a fault and shut down the drivetrain while driving, per CarWhere's Taycan guide. Porsche updated the power electronics and engine control software at dealers under recall 21V-486, a campaign covering 10,373 U.S. cars within a global campaign of about 43,000.
Likely causes
- Power electronics monitoring software wrongly detecting a fault
- Software shutting down the drivetrain in response to the false fault
How to fix it — step by step
- Check the VIN for recall 21V-486 at nhtsa.gov/recalls
- If the car loses drive power with a warning message, coast to a safe stop and restart only to move clear
- Book the free dealer power electronics and engine control software update → Shop the power electronics at Amazon
- Confirm the campaign is recorded as closed before relying on the car
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
This fault usually needs a technician - but this is the part they would test first.
Then the likely broken part is the power electronics.
Parts that commonly fix it
- power electronics - Shop at Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.