Porsche Hatchback Panamera (970, 2010–2016) Rollaway Risk From Shifter Cable Bushing

What this problem usually means

Panameras of 2010-2016 (970, shared with 955/957 Cayenne) are under NHTSA safety recall 19V-446 (Porsche AKB1, 99,665 vehicles across both models): a worn shifter cable bushing can leave the car out of Park even when the lever shows Park, and without the parking brake set the car could roll. The giveaway is the gear display not matching the lever position. Dealers replace the bushing free.

Likely causes

  1. Worn shifter cable bushing (2010-2016 automatics) → Shop the shifter cable bushing at Amazon
  2. Gear display not matching lever position
  3. Ageing bushing material

How to fix it — step by step

  1. Check your VIN for recall AKB1 / 19V-446 and confirm it is closed
  2. Always set the parking brake until the recall is done
  3. Report any lever/display mismatch immediately
  4. Book the free dealer bushing replacement
  5. Verify Park engages positively after the repair

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix it

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.

Related Porsche Hatchback Panamera (970, 2010–2016) problems

See all Porsche Panamera (970, 2010–2016) codes & guides →