Porsche Coupe 911 (992.1, 2020–2024) Windshield Bonding Recall

What this problem usually means

Some 2020-2024 911s (992.1) are under NHTSA safety recall 24V-155 (Porsche ARA3, 8,101 vehicles): the front windshield and rear window may not be properly bonded. The windshield helps support the front airbags in a crash, so a loose one raises injury risk. Dealers inspect and replace the glass as needed, free of charge - there is no owner symptom to watch for, so this is purely a VIN check.

Likely causes

  1. Improper windshield/rear window bonding in production (2020-2024)
  2. Bonding process variation on affected cars
  3. Ageing seals are not the cause - it is a build defect

How to fix it — step by step

  1. Run the VIN through a recall lookup and confirm recall ARA3 / 24V-155 is closed
  2. Book the free dealer inspection if the recall is open
  3. Do not attempt glass bonding repairs yourself - the windshield is part of the airbag support structure → Shop the windshield at Amazon
  4. Keep the recall completion record with the service history
  5. Re-check for wind noise or water leaks after any glass replacement

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix it

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.

Related Porsche Coupe 911 (992.1, 2020–2024) problems

See all Porsche 911 (992.1, 2020–2024) codes & guides →