Porsche Coupe 718 Cayman (982, 2017–2025) Engine failure from cracked connecting rods

What this problem usually means

A batch of 2021 718 Cayman GT4, Spyder and GTS 4.0 cars received connecting rods that could crack, leading to engine damage, a stall or an oil leak, per CarWhere's 718 guide. Porsche replaced the rods, or the whole engine if it had already been run, under recall 21V-200 (Porsche campaign AMA4).

Likely causes

  1. Out-of-specification connecting rods from one supplier batch cracking under load → Shop the connecting rods at Amazon
  2. Rod failure progressing to engine damage, stall or oil leak

How to fix it — step by step

  1. Check the VIN for recall 21V-200 at nhtsa.gov/recalls; only 193 U.S. cars were covered, so paperwork matters
  2. Ask for documentation of rod or engine replacement on any 2021 4.0 car
  3. Do not drive a covered car that has not had the remedy; rod fracture can destroy the engine without warning
  4. Dealer replaces the rods, or the whole engine if it has already been run damaged

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix it

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.

Related Porsche Coupe 718 Cayman (982, 2017–2025) problems

See all Porsche 718 Cayman (982, 2017–2025) codes & guides →