Philips Air purifier AC3256 A3 and C7 (alternating)
What this problem usually means
A3 and C7 display alternately on the screen: replace both filters - the NanoProtect filter HEPA Series 3 (FY3433) and the NanoProtect filter AC (FY3432).
Likely causes
- Both filter lifetimes expired
How to fix it — step by step
- Switch off the appliance before replacing the filters.
- Take out both expired filters and dispose of them. Do not touch the pleated filter surfaces or smell the filters, as they have collected pollutants from the air.
- Remove all packaging from the new filters.
- Place the new NanoProtect filter HEPA Series 3 (FY3433) and NanoProtect filter AC (FY3432) into the appliance. → Shop the nanoprotect filter hepa series 3 (fy3433) at Amazon → Shop the nanoprotect filter ac (fy3432) at Amazon
- Touch and hold the reset button for 3 seconds to reset the filter lifetime counter.
- Wash your hands after changing the filters.
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the likely broken part is the NanoProtect filter HEPA Series 3 (FY3433).
Shop the NanoProtect filter HEPA Series 3 (FY3433) at Amazon
Also tied to this fault: NanoProtect filter AC (FY3432) - Shop at Amazon
Parts that commonly fix it
- NanoProtect filter HEPA Series 3 (FY3433) - Shop at Amazon
- NanoProtect filter AC (FY3432) - Shop at Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Find your model number on the unit's rating plate. It's the key to the right manual pages and the right parts.