Philips Air purifier AC2936/AC2939 Filter cleaning alert

What this problem usually means

The filter cleaning alert displays on the screen: the surface of the NanoProtect Series 3 filter (FY2180/30) needs vacuum cleaning.

Likely causes

  1. Filter surface loaded with dust
  2. Filter cleaning time has elapsed

How to fix it — step by step

  1. Remove the back cover and pull the filter out of the appliance.
  2. Vacuum-clean the surface of the filter.
  3. Put the filter back into the appliance and reattach the back cover.
  4. Switch the appliance on.
  5. Touch and hold the filter status check/reset button for 3 seconds to reset the filter cleaning time.
  6. Wash your hands after handling the filter.

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix it

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Find your model number on the unit's rating plate. It's the key to the right manual pages and the right parts.

Related Philips Air purifier AC2936/AC2939 problems

See all Philips AC2936/AC2939 codes & guides →