Pentair Pool pump SuperFlo VS 0021 Error Code
What the 0021 code means
On Pentair SuperFlo VS variable-speed pool pumps, fault 0021 (21) means the communication link between the HMI (keypad) and motor control has been lost.
Likely causes
- loose 5-pin connector for the keypad wire inside the drive top cover
- damaged keypad cable
- failed drive or keypad
How to fix it — step by step
- Disconnect power and wait until all keypad LEDs have turned off, as the manual directs for SuperFlo VS alarms → Shop the keypad at RepairClinic
- Reconnect power and see if the fault clears
- Do not open the drive top cover unless you are comfortable working around capacitors and wiring → Shop the drive at RepairClinic
- If 0021 returns, call a pool/spa technician to check the keypad connector and cable
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
This fault usually needs a technician - but this is the part they would test first.
Then the likely broken part is the drive.
Shop the drive at RepairClinic or Amazon
Also tied to this fault: keypad - Shop at RepairClinic or Amazon
Parts that commonly fix the 0021 code
- drive - Shop at RepairClinic or Amazon
- keypad - Shop at RepairClinic or Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Find your model number on the unit's rating plate. It's the key to the right manual pages and the right parts.