Nissan Truck Frontier Body rust and corrosion

What this problem usually means

Some 2012 Frontier body panels can rust much quicker than normal and require expensive replacements, with serious corrosion reported in the truck bed, rear passenger door, and bumper. The factory spray-on liner can hide rust in the metal bed, so by the time bubbling shows the rust may have eaten a hole, and the painted bumper offered minimal corrosion protection.

Likely causes

  1. corroding truck bed hidden by spray-on liner
  2. rusting rear passenger door and bumper

How to fix it — step by step

  1. Inspect the truck bed, rear passenger door, and bumper for bubbling or rust → Shop the bumper at Amazon
  2. Check under the bed liner edges for hidden corrosion if possible without removing it
  3. Note any holes or perforation in the bed
  4. Have a body shop repair or replace corroded panels

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix it

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Working on a specific model? The official Nissan manual is on Nissan's support site — you'll need your model number.

Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.

Related Nissan Truck Frontier problems

See all Nissan Frontier codes & guides →