Nissan SUV Rogue (T32, 2014–2020) Revs but won't move

What this problem usually means

The end state of the Rogue's CVT failure pattern: the engine revs but the vehicle barely moves or does not move at all, because the belt has failed or the pulleys are galled and metal debris has gone through the unit. At this point no fluid service helps; it is a replacement decision, and 2016, 2017, 2019 and 2020 model years carry the highest documented CVT failure risk.

Likely causes

  1. Failed CVT belt or pulley set
  2. Valve body failure preventing ratio control
  3. Internal debris damage from an earlier failure stage driven too long
  4. A broken axle or differential fault (rule out; much cheaper)

How to fix it — step by step

  1. Do not keep trying to drive it; revving a failed CVT only spreads debris
  2. Confirm the axles turn with the wheels off the ground or have a shop verify the failure is internal before shopping for a transmission
  3. Check with Nissan whether any class-action warranty extension still covers your VIN; several model years were extended to 7 years/84,000 miles
  4. Compare remanufactured CVT quotes with warranty length; this repair often decides whether the car is worth keeping

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix it

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Working on a specific model? The official Nissan manual is on Nissan's support site — you'll need your model number.

Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.

Related Nissan SUV Rogue (T32, 2014–2020) problems

See all Nissan Rogue (T32, 2014–2020) codes & guides →