Mini SUV Countryman (R60, 2011–2016) Clutch fails early (manual models)

What this problem usually means

The manual first-generation Countryman is known for a weak clutch, especially in early years; it was supposedly updated in 2013 but later years kept failing. Engine Patrol lists burnt smell, trouble shifting, a soft pedal and grinding among the signs, and notes labor (10-15 hours) dwarfs the parts cost.

Likely causes

  1. Premature clutch wear
  2. Dual-mass flywheel wear

How to fix it — step by step

  1. Check for slip under load and a high, vague engagement point
  2. Smell for burnt friction material after hill starts
  3. Ask for service history - some of these cars are on their second or third clutch
  4. Replace the clutch kit and inspect/replace the dual-mass flywheel at the same time → Shop the dual mass flywheel at Amazon → Shop the clutch kit at Amazon

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix it

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.

Related Mini SUV Countryman (R60, 2011–2016) problems

See all Mini Countryman (R60, 2011–2016) codes & guides →