Mini SUV Countryman (F60, 2017–2024) Engine mount rupture
What this problem usually means
Second-generation (F60) Countrymans suffer early failure of the hydraulic upper engine mount: the fluid-filled rubber mount tears under the heavier crossover's loads, leaking dark fluid and letting the engine clunk on gear changes. Engine Patrol lists engine mount failure as the F60's signature problem.
Likely causes
- Torn hydraulic engine mount → Shop the engine mount at Amazon
- Mount fluid leakage
How to fix it — step by step
- Look below the passenger-side frame rail for dark fluid around the mount casing
- Feel for a clunk or shudder as the transmission engages
- Inspect the mount rubber for cracks and collapse
- Replace the mount; check the remaining mounts while apart
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the likely broken part is the engine mount.
Parts that commonly fix it
- engine mount - Shop at Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.