Mini Hatchback Cooper (R56, 2007–2013) Timing chain 'death rattle' on cold start

What this problem usually means

Second-generation Cooper S models with the N14 turbo engine (2007-2012) are notorious for premature timing chain failure - a 'death rattle' on cold start as the stretched chain and worn tensioner/guides slap around. CarXplorer's Mini guide calls it the model's most notorious problem, at $1,500-$3,000+ to repair, and warns that a jumped chain destroys the engine.

Likely causes

  1. Stretched timing chain → Shop the timing chain kit at Amazon
  2. Worn plastic chain guides
  3. Failing chain tensioner
  4. Low oil level accelerating wear

How to fix it — step by step

  1. Listen at cold start for a diesel-like rattle that quiets as the engine warms
  2. Check the oil level - these engines use oil, and low oil starves the tensioner
  3. Have codes read - P0016/P0017 correlation codes support chain stretch
  4. Replace the chain, guides and tensioner proactively if rattling; do not wait for it to jump

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix it

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.

Related Mini Hatchback Cooper (R56, 2007–2013) problems

See all Mini Cooper (R56, 2007–2013) codes & guides →