Midea Window Air Conditioner MAW series — standard electronic control E7 Error Code
What the E7 code means
Unit malfunction on Midea MAW series window air conditioners (listed in the manual on some models, such as MAW08HN1CWT/MAW12HN1CWT). This is the manual's general malfunction code rather than a single-sensor fault. When an error occurs, unplug the unit and plug it back in; if the error repeats, call for service.
Likely causes
- General unit malfunction detected by the control board
- Failed sensor or control board fault not covered by a specific code
How to fix it — step by step
- Unplug the unit and plug it back in
- Restart the unit and check whether E7 returns
- If the error repeats, stop using the unit and call for service for diagnosis
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
This fault usually needs a technician - but this is the part they would test first.
Then the likely broken part is the main control board.
Parts that commonly fix the E7 code
- main control board - Shop at RepairClinic or Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Find your model number on the unit's rating plate. It's the key to the right manual pages and the right parts.
Related Midea Window Air Conditioner MAW series — standard electronic control error codes
See all Midea MAW series — standard electronic control codes & guides →