Mercedes-Benz SUV GLC (X253, 2019) Engine Misfires - Cylinder Head Wear

What this problem usually means

On the facelift GLC300 (2019, M264 engine), the exhaust valve guides and seats wear, producing misfires, rough running, blue smoke and in confirmed cases cylinder head failure, sometimes shortly after the factory warranty ends. Mercedes extended the M264 valve train warranty to 15 years/150,000 miles in North America; that is a warranty extension, not a recall, so a misfiring 2019 GLC300 should have its eligibility checked by VIN before anyone pays for a cylinder head.

Likely causes

  1. Exhaust valve guide wear
  2. Exhaust valve seat wear causing compression loss
  3. Carbon buildup compounding the sealing failure
  4. Spark plugs, coils or injectors mimicking the misfire

How to fix it — step by step

  1. Have the misfiring cylinders identified and compression tested; low compression separates head wear from ignition parts → Shop the cylinder head at Amazon
  2. Rule out plugs, coils and injectors first
  3. Ask a Mercedes dealer to confirm the 15-year/150,000-mile M264 warranty extension against your VIN
  4. If the head is condemned, replacement is internal engine work for a dealer or Mercedes specialist
  5. Confirm misfire counters stay at zero and no blue smoke on cold starts after the repair

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix it

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.

Related Mercedes-Benz SUV GLC (X253, 2019) problems

See all Mercedes-Benz GLC (X253, 2019) codes & guides →