Mercedes-Benz SUV GLA (H247, 2020–2022) Engine misfires - cylinder head wear

What this problem usually means

The most serious documented fault on the H247 GLA: M260 engines produced approximately 2019-2022 can suffer premature wear of the exhaust valve seat rings and valve guides. As the seats wear, the combustion chamber loses its seal, causing rough running, misfires (codes P0300/P0302 or similar) and reduced power, typically appearing between 30,000 and 80,000 km. The valve seats cannot be reworked - the entire cylinder head must be replaced. Mercedes extended the cylinder-head warranty on affected M260 engines to 15 years or 241,000 km for 2019-2022 GLA, A-Class, CLA and GLB models, so check whether the head has already been replaced under warranty or the car is still within coverage.

Likely causes

  1. Exhaust valve seat ring wear (M260, approx. 2019-2022 production)
  2. Exhaust valve guide wear causing compression leakage

How to fix it — step by step

  1. Have the misfiring cylinders identified and a compression or leak-down test done
  2. Rule out spark plugs, coils and injectors first, since those are cheap and common
  3. Ask a Mercedes dealer to confirm the 15-year/241,000 km extended warranty against your VIN before authorising work
  4. If the head is condemned, replacement is internal engine work for a dealer or specialist

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix it

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.

Related Mercedes-Benz SUV GLA (H247, 2020–2022) problems

See all Mercedes-Benz GLA (H247, 2020–2022) codes & guides →