Mercedes-Benz Sedan E-Class (W211/W212, 2005–2011) Transmission Limp Mode When Hot
What this problem usually means
The 722.9 seven-speed automatic fitted to E-Class models from 2005 to 2011 fails through its conductor plate: the internal speed sensors fail when the transmission is hot, dropping the gearbox into limp mode locked in second gear, with no reverse and harsh downshifts, storing codes in the 0717/0718 family. The fault characteristically appears after a hot restart and may vanish when the car cools, which is why owners chase it as an intermittent electrical problem first. The conductor plate is a valve-body-level repair, not a full transmission rebuild.
Likely causes
- Conductor plate speed sensors failing with heat
- Aged transmission fluid worsening sensor and shift behaviour
- Valve body wear adding harsh downshifts
- Torque converter faults being mistaken for the plate failure
How to fix it — step by step
- Note the heat pattern: limp mode after a hot restart that clears cold is the conductor plate signature → Shop the conductor plate at Amazon
- Have the transmission codes read; 0717/0718-family codes confirm the speed sensors
- Check when the transmission fluid and filter were last changed → Shop the transmission filter at Amazon → Shop the transmission fluid at Amazon
- Have the conductor plate replaced and adaptations reset by a Mercedes specialist
- Road-test the car fully hot, including reverse and kickdown, before accepting the repair
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the likely broken part is the conductor plate.
Shop the conductor plate at Amazon
Also tied to this fault: transmission fluid - Shop at Amazon; transmission filter - Shop at Amazon
Parts that commonly fix it
- conductor plate - Shop at Amazon
- transmission fluid - Shop at Amazon
- transmission filter - Shop at Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.
Related Mercedes-Benz Sedan E-Class (W211/W212, 2005–2011) problems
See all Mercedes-Benz E-Class (W211/W212, 2005–2011) codes & guides →