Mercedes-Benz Sedan C-Class (W204, 2008–2014) Timing Chain Stretch

What this problem usually means

The W204 C-Class (2008-2014) with the M271 four-cylinder uses a single-row timing chain that stretches, and the camshaft adjuster sprocket teeth wear with it, so the classic presentation is a cold-start rattle followed by camshaft timing codes P0016 and P0017 once the stretch is established. Because the chain, tensioner, guides and both adjusters wear as a system, specialists replace them together; replacing only the chain on worn adjusters brings the rattle and codes back.

Likely causes

  1. Single-row timing chain stretched with mileage
  2. Camshaft adjuster sprocket teeth worn
  3. Tensioner no longer taking up the slack
  4. Long oil intervals accelerating chain and guide wear

How to fix it — step by step

  1. Listen for the rattle specifically on a cold start; a warm engine can sound fine
  2. Have the codes read; P0016/P0017 with the rattle confirms the timing drive
  3. Ask whether chain, tensioner, guides and both adjusters were ever replaced as a set
  4. Do not keep driving on timing codes; a jumped chain on this engine bends valves → Shop the timing chain at Amazon
  5. Have the full timing set replaced by a Mercedes specialist; this is internal engine work

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix it

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.

Related Mercedes-Benz Sedan C-Class (W204, 2008–2014) problems

See all Mercedes-Benz C-Class (W204, 2008–2014) codes & guides →