Medify Air Air purifier MA-40 Filter Replacement Indicator
What this problem usually means
Light Indicator to Replace the Filter: the indicator icon becomes lit when the filter needs to be replaced. The manual's resetting procedure restarts the timer for 3,000 hours. This model uses a one-piece 3-stage Medify filter (pre-filter, True HEPA H13 filter and activated carbon filter).
Likely causes
- Filter has reached the end of its service life and the indicator icon is lit
- Filter replacement timer has expired
How to fix it — step by step
- Unplug the unit before changing the filter
- Press the top buttons on the back cover and pull the cover, lift the back cover and pull out slightly
- Remove the old filter from the unit by pulling on the tab at the top
- Remove any plastic packaging from the new filter, then place the new filter in the air purifier with the white side facing out to you, with the tab at the top facing you
- Replace the back cover
- Turn the unit back on and hold down the FAN SPEED button and the IONIZER button at the same time for 3-5 seconds - the indicator light will go off and the timer will be reset for 3,000 hours
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the likely broken part is the Medify 3-stage filter for MA-40.
Parts that commonly fix it
- Medify 3-stage filter for MA-40 - Shop at Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Find your model number on the unit's rating plate. It's the key to the right manual pages and the right parts.