Medify Air Air purifier MA-40 V3.0 Filter Replacement Light

What this problem usually means

Light Indicator to Replace the Filter (V3.0 manual): the unit reminds the user when the filter needs to be replaced - filters should be replaced every 2,500 hours of use, and the filter indicator light lets you know when you have reached that time. The manual states not to clean the HEPA filter or carbon filter; replace them instead.

Likely causes

  1. Filter has reached approximately 2,500 hours of use
  2. Filter indicator light has come on

How to fix it — step by step

  1. Place the unit in a dry location on a flat surface and remove all plastic packaging from the filter before installing it - do not run the unit without a filter
  2. Press the tabs on the back cover and pull on the cover, then lift the back cover and pull out slightly
  3. Remove the filter and remove all plastic packaging
  4. Place the filter back in the air purifier with the white side facing out towards you, with the tab at the top of the filter facing you
  5. Replace the back cover

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix it

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Find your model number on the unit's rating plate. It's the key to the right manual pages and the right parts.

Related Medify Air Air purifier MA-40 V3.0 problems

See all Medify Air MA-40 V3.0 codes & guides →