Mazda SUV CX-9 Front ball joint wear
What this problem usually means
On earlier CX-9s (2007 to 2013), front lower ball joints can corrode when water gets in; the check is for play and split boots. The fault was recalled in the US, and a pair of lower arms is the usual repair.
Likely causes
- corroded front lower ball joints
- split ball joint boots letting water in
How to fix it — step by step
- Check by VIN whether the US ball joint recall applies to the car → Shop the ball joint at Amazon
- Have the car inspected on a lift for ball joint play and split or torn boots
- Do not keep driving on a joint with obvious play - separation can cause a loss of control
- Replace the lower control arms with ball joints, normally as a pair, and check alignment → Shop the lower control arm at Amazon
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
This fault usually needs a technician - but this is the part they would test first.
Then the likely broken part is the lower control arm.
Shop the lower control arm at Amazon
Also tied to this fault: ball joint - Shop at Amazon
Parts that commonly fix it
- lower control arm - Shop at Amazon
- ball joint - Shop at Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.