Mazda SUV CX-50 Loose front suspension fasteners

What this problem usually means

Around 1,000 CX-50s made in 2025, hybrid and non-hybrid, were recalled for front suspension fastener bolts that may not have been tightened properly. Loose fasteners can let suspension components or a wheel detach, causing a loss of vehicle control and drive power.

Likely causes

  1. front suspension fasteners not tightened to specification

How to fix it — step by step

  1. Do not keep driving if there is a new clunk, wobble or looseness from a front corner - park safely
  2. Check by VIN whether the front suspension fastener recall applies to the vehicle
  3. Avoid checking suspension bolt tightness yourself on a jack
  4. Have a dealer inspect, retighten or replace the front suspension fasteners free of charge under the recall → Shop the front suspension fasteners at Amazon

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix it

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.

Related Mazda SUV CX-50 problems

See all Mazda CX-50 codes & guides →