Mazda SUV CX-5 (KE, 2016) Daytime Running Light Failure

What this problem usually means

On 2016 CX-5s the LED daytime running lights can flicker or fail completely, the subject of NHTSA safety recall 20V063 (36,761 vehicles; Mazda campaign 4320A). The cause documented in the recall reporting is a sealing gasket at the headlight connector that releases sulfur and corrodes the LED circuit; the DRL is part of a sealed headlamp unit, not a replaceable bulb. Typical onset is around 40,000-50,000 miles, and dealers inspect the headlights and replace the gasket or the headlight assemblies free of charge.

Likely causes

  1. Sulfur released by the headlight sealing gasket corroding the LED circuit → Shop the headlight sealing gasket at Amazon
  2. LED daytime running light circuit failure inside the sealed headlamp
  3. Connector or gasket degradation on the affected 2016 units

How to fix it — step by step

  1. Check your VIN at nhtsa.gov/recalls for 20V063; the inspection and remedy are free at a Mazda dealer
  2. Do not buy a replacement bulb; the DRL is integrated into the sealed headlamp assembly
  3. Photograph which side flickers or has failed and whether it is intermittent, to give the dealer a clear record
  4. If the recall is already closed on your car and a DRL fails again, price a complete headlight assembly rather than a bulb → Shop the headlight assembly at Amazon

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix it

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.

Related Mazda SUV CX-5 (KE, 2016) problems

See all Mazda CX-5 (KE, 2016) codes & guides →