Mazda SUV CX-30 Excessive oil consumption
What this problem usually means
Some CX-30s with the 2.5 Skyactiv-G Turbo engine, mainly units made between 2020 and 2021, burn too much oil. Failing or damaged exhaust-side valve stem seals let excess oil past the valves to be consumed, so owners need more frequent oil top-ups, and Mazda issued special service program SSPD5 for the problem.
Likely causes
- failing exhaust valve stem seals
- damaged valve stem seals on the 2.5 turbo engine
How to fix it — step by step
- Check the oil level on the dipstick and note how quickly it drops between checks
- Top up only with the specified oil if the level is low
- Ask a dealer whether special service program SSPD5 applies to the car by VIN
- Have a shop replace the faulty exhaust valve stem seals if the program or diagnosis confirms them → Shop the valve stem seals at Amazon
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
This fault usually needs a technician - but this is the part they would test first.
Then the likely broken part is the valve stem seals.
Parts that commonly fix it
- valve stem seals - Shop at Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.