Mazda Hatchback Mazda3 (2nd gen, 2010–2013) Liftgate Falls Unexpectedly
What this problem usually means
Liftgate support struts on 2010-2013 Mazda3 hatchbacks can corrode and break, letting the gate drop without warning; NHTSA safety recall 16V644 covers 580,455 vehicles in total across the Mazda3, Mazda5, CX-3 and CX-5. Dealers replace both struts free of charge.
Likely causes
- Corrosion of the liftgate support strut outer tube, worsened by salt and water exposure
- Strut breakage after the corrosion weakens it
- One weakened strut transferring the full load to the other until it also fails
How to fix it — step by step
- Check your VIN at nhtsa.gov/recalls for 16V644; both struts are replaced free if covered
- Prop the gate securely and keep your head and hands clear if a strut feels weak, creaks or will not hold the gate fully open
- Inspect both struts for rust bubbling or cracking at the outer tube
- Replace struts in pairs if you are paying yourself; a single new strut beside a corroded one does not fix the pattern
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the likely broken part is the liftgate support struts.
Parts that commonly fix it
- liftgate support struts - Shop at Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.