Lincoln SUV Navigator Corrosion on battery cable ends

What this problem usually means

Navigator battery cable ends corrode readily, and the corrosion can migrate under the cable insulation, causing numerous electrical faults and drivability issues. CarParts' guide lists corroded cable ends on 1998-2010 and 2015 Navigators, with owners reporting the problem at an average of about 120,000 miles.

Likely causes

  1. Corroded battery cable terminals → Shop the battery cable at Amazon
  2. Corrosion wicking under the cable insulation

How to fix it — step by step

  1. Inspect both cable ends for white/green corrosion, including under the insulation near the terminal
  2. Test for voltage drop across each cable under load - resistance hides under clean-looking insulation
  3. Clean terminals and protect them; replace cables with internal corrosion rather than just cleaning the ends
  4. Recheck charging and starting behavior after repair - many 'electrical' faults trace back here

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix it

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.

Related Lincoln SUV Navigator problems

See all Lincoln Navigator codes & guides →