LG Dishwasher AE Error Code
What the AE code means
Leak detected (also shown as E1 or EI on some models): water in the base pan has activated the float switch and the dishwasher keeps draining to protect the floor. LG groups AE/EI/FE together as leakage/overfilling.
Likely causes
- Leak from a hose fitting, pump or door gasket
- Oversudsing from dish soap or too much detergent
- Unit not level or door misaligned
- Water poured into the Heat Dry blower on Dynamic Heat Dry models
How to fix it — step by step
- Turn off the water supply and unplug the dishwasher
- Check under and around the unit for visible water and check the door gasket
- Make sure only dishwasher detergent is used and the unit is level
- If there is no visible leak but AE persists, unplug and request service - do not pull out a built-in unit if water went into the Heat Dry blower
Parts that commonly fix the AE code
- float switch - Shop at RepairClinic
- door gasket - Shop at RepairClinic
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.