Lexus SUV TX Front steering knuckle may crack
What this problem usually means
Certain 2026 TX 350 and TX 500h models were recalled because, due to a manufacturing error, the front steering knuckles may crack and break, which can result in a loss of vehicle steering control (NHTSA 26V-598), per MotorGPA's NHTSA-based TX recall file. Dealers inspect and replace the front steering knuckles as necessary, free of charge.
Likely causes
- Manufacturing error in the front steering knuckles on affected 2026 production → Shop the front steering knuckle at Amazon
- Knuckle cracking progressing to breakage
How to fix it — step by step
- Check the VIN for recall 26V-598 at nhtsa.gov/recalls
- Do not ignore new front-end clicking, looseness or alignment changes on a 2026 TX
- Book the free dealer inspection and knuckle replacement if required
- Have a wheel alignment checked after any knuckle replacement
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
This fault usually needs a technician - but this is the part they would test first.
Then the likely broken part is the front steering knuckle.
Parts that commonly fix it
- front steering knuckle - Shop at Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.