Lexus SUV GX (J150, 2010–2023) Oil in Spark Plug Tubes

What this problem usually means

Many GX 460 owners find oil in the spark plug tubes when changing plugs at 100,000-150,000 miles: oil seeps onto the tops of the plugs and can reach the ignition coils and electrodes, occasionally causing misfires, though it rarely leaks enough to need top-ups between changes. The fix is to remove the valve covers and replace both the valve cover gaskets and the spark plug tube seals at the same time, since the same ageing rubber causes both leaks.

Likely causes

  1. Worn spark plug tube seals at the bottom of the tubes
  2. Worn valve cover gasket letting oil onto the plug tops
  3. Heat-aged gasket rubber at 100,000+ miles

How to fix it — step by step

  1. Pull the coils and plugs at the scheduled plug change and inspect each well for oil
  2. Clean the wells and coils thoroughly before fitting new plugs, so old oil does not foul them
  3. Replace the valve cover gasket and spark plug tube seals together while the covers are off → Shop the spark plug tube seals at Amazon → Shop the valve cover gasket at Amazon
  4. Check for misfire codes after reassembly and road-test
  5. Re-inspect one well at the next service to confirm the new seals are holding

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix it

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.

Related Lexus SUV GX (J150, 2010–2023) problems

See all Lexus GX (J150, 2010–2023) codes & guides →