Lexus Sedan IS Water pump failure and coolant leak

What this problem usually means

The 3.5L 2GR V6 used in IS 350 models is documented by Verdict's Lexus guide as commonly needing a water pump around 100,000 miles. A failing pump weeps coolant and can progress to overheating if the leak is ignored.

Likely causes

  1. Worn water pump bearing/seal at high mileage
  2. Coolant seepage from the pump weep hole

How to fix it — step by step

  1. Check coolant level cold and look for pink residue near the pump
  2. Listen for bearing whine from the pump area
  3. Stop driving if the temperature gauge climbs
  4. Replace the water pump and refill/bleed the cooling system → Shop the water pump at Amazon

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix it

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.

Related Lexus Sedan IS problems

See all Lexus IS codes & guides →