Land Rover SUV Range Rover Velar Air suspension sagging or fault warning

What this problem usually means

The Velar's air suspension - with leaking bags and an overworked compressor - is described as a classic JLR recurring fault. A leaking air spring lets a corner drop, the compressor runs longer to compensate, and it eventually fails too if the leak is left.

Likely causes

  1. Leaking air spring (air bag)
  2. Compressor worn out from compensating for a leak
  3. Valve block or height sensor fault

How to fix it — step by step

  1. Check ride height at all four corners after the vehicle has sat parked
  2. Listen for the compressor running continuously or for much longer than usual
  3. Scan the suspension module for fault codes
  4. Leak-test and replace the failed air spring, compressor, valve block or sensor → Shop the air spring at Amazon

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix it

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.

Related Land Rover SUV Range Rover Velar problems

See all Land Rover Range Rover Velar codes & guides →