Kia Wagon Carnival Won't accelerate past 30 mph

What this problem usually means

Some 2025 Carnival owners report the vehicle refusing to accelerate beyond about 30 or 31 mph, in some cases while displaying a warning that the speed limit is 30 mph on roads where it is not. Dealers have often been unable to determine the cause, and a transmission computer reset tried on one vehicle did not appear to be effective.

Likely causes

  1. vehicle incorrectly displaying a 30 mph speed limit warning while limiting acceleration
  2. underlying cause not identified by dealers in many reported cases

How to fix it — step by step

  1. Pull over safely, switch the vehicle fully off and restart it, then check whether normal acceleration returns
  2. Photograph the speed limit warning and record the road, date and mileage
  3. Confirm no driver-set maximum speed limit feature is switched on
  4. Have a dealer scan for stored codes and log the complaint even if the fault cannot be reproduced

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix it

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.

Related Kia Wagon Carnival problems

See all Kia Carnival codes & guides →