Kia SUV Telluride (ON, 2020–2025) Oil Consumption

What this problem usually means

The Telluride's 3.8 Lambda II V6 is not a Theta II, but it does burn oil: What-Breaks documents consumption climbing between roughly 70,000 and 90,000 miles, up to about a quart per 1,000-1,500 miles in severe cases from carbon-stuck oil control rings - and RoadEthos notes it can burn oil with no low-oil warning. Checking the dipstick between services is the whole defence.

Likely causes

  1. Carbon-stuck oil control rings letting oil into combustion
  2. GDI carbon buildup contributing to ring sticking
  3. Worn valve seals/rings at higher mileage
  4. Low oil run unnoticed because no level warning appears

How to fix it — step by step

  1. Check the oil level monthly and before long trips; log use per 1,000 miles
  2. Look for blue smoke on cold start, a burnt-oil smell at idle, and fouled plugs at service
  3. Rule out leaks - including around the plastic oil filter housing, which cracks if overtightened → Shop the oil filter housing at Amazon
  4. Ask a dealer to run an oil-consumption test if use approaches a quart per 1,000 miles
  5. Keep the level at full while it is being assessed; engine damage from running low is owner-side, consumption may not be

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix it

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.

Related Kia SUV Telluride (ON, 2020–2025) problems

See all Kia Telluride (ON, 2020–2025) codes & guides →