Kia SUV Telluride (ON, 2020–2024) Front Power Seat Overheating / Fire Risk

What this problem usually means

2020-2024 Tellurides (462,869 vehicles) were recalled in June 2024 under 24V-407: a stuck front power seat slide knob can keep the seat motor running until it overheats and starts a fire, parked or driving, with park-outside advice. Sources read for this batch note a later 2026 campaign (26V-430) replaced 24V-407 after problems with the first repair - so a car 'done' under 24V-407 may still be open.

Likely causes

  1. Stuck power seat slide knob keeping the motor energised → Shop the power seat motor at Amazon
  2. Seat switch damaged by a knock to the side cover/knob
  3. Motor overheating against resistance until trim melts
  4. Improper earlier 24V-407 repair (basis for the superseding campaign)

How to fix it — step by step

  1. Check your VIN for both 24V-407 and the superseding 26V-430 - an old completion does not settle it
  2. Park outside until the current campaign on your VIN is closed
  3. Test the slide knob/switch: it should spring back and the motor must stop when released
  4. Stop using a seat adjustment that sticks, hums, or smells hot, and disconnect nothing yourself - book the dealer
  5. Have the dealer fit the current remedy (switch covers/knobs, and the electronic fuse assembly under the newer campaign) free of charge

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix it

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.

Related Kia SUV Telluride (ON, 2020–2024) problems

See all Kia Telluride (ON, 2020–2024) codes & guides →