Kia SUV Telluride (ON, 2020–2020) Rear Shock Clunk / Rough Ride

What this problem usually means

RepairPal's 2020 Telluride reporting leads with a rough ride and clunking from the rear due to a leaking shock, noting specialised shock replacement is required - and owners report both rear shocks gone by around 53,000 miles on AWD cars with no off-road or accident history. A rear clunk over bumps with a bouncy, unsettled ride is the test-drive signature.

Likely causes

  1. Leaking rear shock absorber losing damping → Shop the shock absorber at Amazon
  2. Both rear shocks wearing out early as a pair
  3. Worn rear suspension bushings or links adding clunks → Shop the rear suspension bushing at Amazon
  4. Self-levelling rear suspension components (where fitted) complicating replacement

How to fix it — step by step

  1. Bounce-test each rear corner and compare sides; a corner that keeps bouncing has lost damping
  2. Inspect the shock bodies for oil leakage - a wet shock is a failed shock
  3. Listen on a bumpy road: clunk over bumps plus rough ride points to shocks before smaller links
  4. Check tyre wear for cupping, a classic sign of dead dampers
  5. Replace shocks in axle pairs with the correct Telluride parts - rear shock work on this model is specialised, so get a shop quote

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix it

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.

Related Kia SUV Telluride (ON, 2020–2020) problems

See all Kia Telluride (ON, 2020–2020) codes & guides →