Kia SUV Sportage Oxygen sensor failure
What this problem usually means
The 2.0 petrol Sportage (2010-2016) has a relatively high rate of oxygen (lambda) sensor failure. A failing sensor makes the engine management run an incorrect fuel mixture, causing poor fuel economy, hesitation on acceleration and an illuminated engine management light, confirmed by codes such as P0136 or P0141.
Likely causes
- failed oxygen sensor
- incorrect fuel mixture from bad sensor readings
How to fix it — step by step
- Scan for oxygen sensor codes such as P0136 or P0141 → Shop the oxygen sensor at Amazon
- Note poor fuel economy or hesitation that arrived with the warning light
- Do not ignore the light - running rich or lean for a long time can damage the catalytic converter
- Replace the failed oxygen sensor and clear codes, then confirm the light stays off
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the likely broken part is the oxygen sensor.
Parts that commonly fix it
- oxygen sensor - Shop at Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.