Kia SUV Sportage (SL, 2010–2015) Steering Clunk

What this problem usually means

A clunk or click felt through the wheel at standstill or parking speed on SL Sportage cars (2010-2015) usually points to the rubber flexible coupling inside the column-mounted electric power steering motor, which crumbles with age. Kia/Hyundai bulletins replace it with an improved part; worn tie-rod ends and steering joints produce a similar clunk on lock, so the two need separating.

Likely causes

  1. Disintegrating MDPS flexible steering coupling (mainly SL, 2010-2015) → Shop the steering coupling at Amazon
  2. Worn tie-rod ends or steering joints with play
  3. Worn strut mounts or drop links clunking over bumps instead
  4. Loose steering column or intermediate shaft fasteners

How to fix it — step by step

  1. Turn the wheel lock to lock while stationary: a click/clunk through the column at standstill is the coupling test
  2. Have a helper rock the wheel while you watch the tie-rod ends for play - movement there points to joints, not the coupling
  3. Note whether the noise is at standstill (coupling) or only over bumps (suspension links/mounts)
  4. Check power steering warning lights and steering feel; a noise alone is usually not dangerous, a light plus heavy steering is different
  5. Replacing the coupling means opening the MDPS motor on the column - a fiddly job most owners give to a shop

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix it

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.

Related Kia SUV Sportage (SL, 2010–2015) problems

See all Kia Sportage (SL, 2010–2015) codes & guides →