Kia SUV Sorento (XM, 2012–2014) Engine Knocking / Failure

What this problem usually means

The Sorento is a centrepiece of recall 17V-224 (SC147): on 2012-2014 cars with the 2.4 GDi (and related Theta II builds), machining debris restricts oil flow to the bearings, causing metallic knock, an oil-pressure warning, then seizure and possible fire. The KSDS software watches for bearing vibration - code P1326 and limp mode - and lifetime short-block coverage depends on that update being installed.

Likely causes

  1. Connecting-rod bearing wear from manufacturing debris (recall 17V-224/SC147)
  2. Oil starvation worsened by the model's oil consumption
  3. KSDS detection of bearing wear (P1326) cutting power to protect the engine
  4. Crankshaft/bearing damage already progressed to seizure

How to fix it — step by step

  1. Stop driving on a metallic knock that rises with revs, especially with an oil-pressure light
  2. Check oil level and for metal particles in the oil or filter
  3. Confirm by VIN that recall SC147 work and the KSDS update were done - settlement engine coverage hinges on KSDS
  4. Scan for P1326; a flashing check-engine light with reduced power is the KSDS limp mode, not a sensor glitch to clear
  5. Have the engine assessed at a dealer before paying anyone - qualifying cars get short-block replacement under the extended coverage → Shop the engine short block at Amazon

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix it

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.

Related Kia SUV Sorento (XM, 2012–2014) problems

See all Kia Sorento (XM, 2012–2014) codes & guides →