Kia SUV Seltos Transmission jerking and failing
What this problem usually means
The continuously variable transmission in the 2021 Seltos 2.0L has been noted for erratic and jerking behavior, which partly causes it to fail prematurely, and transmission failing or overheating are two of the model's biggest reported problems. The transmission can struggle under load, causing poor acceleration or, in severe cases, sending the car into limp mode and leaving drivers stranded.
Likely causes
- ivt struggling and overheating under load
- premature ivt wear or failure
How to fix it — step by step
- Note whether the jerking happens from a stop, under load or only when the transmission is hot
- Check the service history for transmission software updates and technical service bulletin work
- Scan the transmission control module for fault codes before replacing any parts
- Have a shop test the transmission, since a unit that overheats or slips under load usually needs repair or replacement
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
This fault usually needs a technician - but this is the part they would test first.
Then the likely broken part is the ivt transmission.
Parts that commonly fix it
- ivt transmission - Shop at Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.