Kia Sedan K5 (DL3, 2021–2023) Loss of Drive Power

What this problem usually means

2021-2023 K5 GT cars with the 2.5T engine and 8-speed wet DCT can lose all drive power when the transmission's electric oil pump faults - recall 22V-760 (SC250). Kia's bulletin describes a chime, a 'stop safely' message and code P1C2D03, then 20-30 seconds of driving before the gears disengage. Dealers inspect, update TCU logic, and replace the transmission if the code is stored.

Likely causes

  1. Cracked or faulty electric oil pump (EOP) circuit board in the 8-speed wet DCT
  2. Failed fail-safe limited-mobility mode after a pump malfunction
  3. TCU logic needing the SC250 software improvement
  4. Internal DCT damage after driving on a failed pump

How to fix it — step by step

  1. If the warning chimes and 'stop safely' appears, pull over in that short window - the car will lose drive completely
  2. Check your VIN for recall 22V-760/SC250; the inspection, software and any transmission replacement under it are free
  3. Scan the TCU for P1C2D03 - Kia's bulletin makes that code the trigger for transmission replacement
  4. Do not clear the code and keep driving; it returns as a complete loss of drive, not a limp mode you can live with
  5. Keep the recall paperwork - this campaign is the first thing a buyer or insurer will ask about on a GT

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix it

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.

Related Kia Sedan K5 (DL3, 2021–2023) problems

See all Kia K5 (DL3, 2021–2023) codes & guides →