Kia Sedan Forte Brake light switch failure
What this problem usually means
The 2010 Forte is known for a faulty stop lamp switch, which can interfere with the brake lights, cruise control and push-button start, and can even let the shifter move out of park with the ignition on. Kia recalled over 980,000 vehicles in 2013 for free stop lamp switch replacement.
Likely causes
- faulty stop lamp (brake light) switch → Shop the brake light switch at Amazon
How to fix it — step by step
- Check by VIN whether the 2013 stop lamp switch recall was completed
- Test whether the brake lights light every time the pedal is pressed and whether cruise control cancels with the brake
- Do not rely on the car staying in park if the switch is faulty - use the parking brake
- Have the stop lamp switch replaced - free at a dealer if the recall is still open on the car
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the likely broken part is the brake light switch.
Parts that commonly fix it
- brake light switch - Shop at Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.