Kia Sedan Forte (YD, 2014–2018) Engine Knocking

What this problem usually means

2014-2018 Forte cars with Nu engines show an above-average rate of metallic knock and sudden failure, and two recalls frame it: 20V-750 covers 2014-2015 Nu GDi cars for piston damage and engine-fire risk, while 21V-260 (SC210) covers 2017-2018 Nu MPI cars where debris can jam the oil pump. A knock that grows with revs is a stop-driving symptom, not a wait-and-see one.

Likely causes

  1. Connecting-rod bearing or piston damage on Nu GDi engines (recall 20V-750 era)
  2. Oil pump jammed by foreign particles (recall 21V-260, 2017-2018) → Shop the oil pump at Amazon
  3. Oil starvation from low level or sludge after stretched oil changes
  4. Knock Sensor Detection System (KSDS) detecting bearing wear and cutting power

How to fix it — step by step

  1. Stop driving if the knock is loud, the oil-pressure light flickers, or the check-engine light flashes - continued running can seize the engine
  2. Check the oil level and condition immediately; low or glittery oil points inside the engine
  3. Check your VIN for recalls 20V-750 and 21V-260 and whether the KSDS software update is installed
  4. Scan for codes, including P1326, which flags suspected rod-bearing wear
  5. Have a shop do an oil-pressure and bearing check before authorising any top-end parts - this is internal engine work

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix it

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.

Related Kia Sedan Forte (YD, 2014–2018) problems

See all Kia Forte (YD, 2014–2018) codes & guides →