Kia Sedan Forte (BD, 2019–2024) Oil Consumption

What this problem usually means

The Forte's 2.0 Nu engines are known oil burners in two waves: 2019-2021 cars fall under piston oil-ring recall 21V-259 (SC217), where over-hard rings can score the bores, and earlier and later Nu cars burn oil as carbon-stuck oil control rings stop scraping the cylinder walls - the pattern Kia TSB ENG222 was written to diagnose. Watch for a dropping level with no leak underneath.

Likely causes

  1. Over-hard piston oil rings scoring the cylinder walls (recall 21V-259, 2019-2021) → Shop the piston rings at Amazon
  2. Carbon-stuck oil control rings (TSB ENG222)
  3. Worn piston rings or valve seals at higher mileage
  4. Oil run low for long periods, accelerating ring and bore wear

How to fix it — step by step

  1. Check the oil level weekly and log how much you add per 1,000 miles - a dated log is what a dealer oil-consumption test is judged against
  2. Check your VIN for recall 21V-259; if the defect is confirmed, Kia replaces the engine free of charge
  3. Look for blue smoke on cold start or on overrun, and check for external leaks first so burning is not confused with leaking
  4. Scan for P0420 - a catalyst being poisoned by burned oil is a common downstream sign
  5. If use exceeds roughly a quart per 1,000 miles, book the dealer consumption test rather than just topping up forever

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix it

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.

Related Kia Sedan Forte (BD, 2019–2024) problems

See all Kia Forte (BD, 2019–2024) codes & guides →